home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19980901-19981211 / 000229_news@newsmaster….columbia.edu _Tue Oct 27 23:21:04 1998.msg < prev    next >
Internet Message Format  |  2020-01-01  |  3KB

  1. Return-Path: <news@newsmaster.cc.columbia.edu>
  2. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
  3.     by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id XAA16546
  4.     for <kermit.misc@watsun.cc.columbia.edu>; Tue, 27 Oct 1998 23:21:00 -0500 (EST)
  5. Received: (from news@localhost)
  6.     by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id XAA25051
  7.     for kermit.misc@watsun; Tue, 27 Oct 1998 23:20:59 -0500 (EST)
  8. Path: news.columbia.edu!panix!nntprelay.mathworks.com!newsfeed.cwix.com!209.95.128.196!news-nyc.telia.net!ubnnews.unisource.ch!news.itu.ch!ties.itu.int!marsh
  9. From: arthur marsh <marsh@ties.itu.int>
  10. Newsgroups: comp.protocols.kermit.misc
  11. Subject: Re: newbie question:atdt command works but not using dial command
  12. Date: Wed, 28 Oct 1998 05:19:14 +0100
  13. Organization: International Telecommunication Union (ITU)
  14. Lines: 51
  15. Message-ID: <Pine.OSF.4.03.9810280513540.1405-100000@ties.itu.ch>
  16. References: <363441A7.90910EC@siemens.com.sg> <7126lf$lb7$1@apakabar.cc.columbia.edu> <36359FA8.B12A7FAD@siemens.com.sg>
  17. NNTP-Posting-Host: ties.itu.ch
  18. Mime-Version: 1.0
  19. Content-Type: TEXT/PLAIN; charset=US-ASCII
  20. X-Trace: sanaga.itu.ch 909548369 174 156.106.192.33 (28 Oct 1998 04:19:29 GMT)
  21. X-Complaints-To: abuse@itu.int
  22. NNTP-Posting-Date: 28 Oct 1998 04:19:29 GMT
  23. To: Muljawan Hendrianto <muljawan.hendrianto@siemens.com.sg>
  24. X-Sender: marsh@ties.itu.ch
  25. In-Reply-To: <36359FA8.B12A7FAD@siemens.com.sg>
  26. Xref: news.columbia.edu comp.protocols.kermit.misc:9429
  27.  
  28.  
  29. I have used the Motorola Codex 3265 and now have a Mtorola Codex 3266
  30. running with Kermit 95. I ended up customising the initialisation strings
  31. as there are different features disabled or enabled by telecommunications
  32. requirements in different countries and practical problems like dial tone
  33. not being detected on my exchange type.
  34.  
  35. If you send me the output of an at*st0 command I could make some
  36. suggestions on your settings.
  37.  
  38. On Tue, 27 Oct 1998, Muljawan Hendrianto wrote:
  39.  
  40. > Frank da Cruz wrote:
  41. > > :
  42. > > This indicates a total failure to communicate with the modem.  The
  43. > > manual
  44. > > goes into great detail about how to set up and troubleshoot modem
  45. > > connections.
  46. > >
  47. > > You didn't show the sequence of commands you used.  It should have
  48. > > been:
  49. > >
  50. > >   set modem type motorola-montana
  51. > >   set line /dev/ttyS1
  52. > >   set speed 38400
  53. > >   dial 97407554
  54. > >
  55. > > in that order; the order is important.
  56. > >
  57. > > A couple other hints:
  58. > >
  59. > >  1. Use "set dial display on" to monitor the dialog between Kermit and
  60. > >
  61. > >     the modem.
  62. > >
  63. > Thanks Frank,
  64. > After I did "set dial display on", I saw the dialog between Kermit and
  65. > the modem.
  66. > It seems that I init string is not working with my modem , since I don't
  67. > use the motorola-montana. I did follow the step you mentioned above.
  68. > My modem is Motorola Codex 3265, so it seems that I need to put in the
  69. > right init-string.
  70. > How can I do that?
  71. > thanks,
  72. > Muljawan
  73.